Before we begin, don’t miss the post this week with 33 inspirational recycled tie projects, and a few more at Pinterest.

Last weekend I finished an experiment that had been on my ‘must try’ list for quite a while – a recycled tie dress for my Divine Little Miss M. And although it was a serious sewing hack, I’m quite pleased with the results…and so was M.

I promised a DIY tutorial for my recycled tie dress – despite the fact that I am far from a real seamstress. Before you start make sure that you’ve gathered a fun selection of used ties with similar color hues but different patterns. I chose blue and red as an overall color mood, but you’ll see pops of gray and yellow as well. Several of the ties came from thrifting and a couple came from the closet of my friend’s husband.  To give you an idea of the number of ties you’ll need, this dress is for a 7-year old and I used 10 ties – 9 for the skirt and 1 around the waist where the ties and Tshirt are sewn together.

Cut your ties in half so that you are now working with a wider piece (front of tie) and a thinner piece (back of tie). I laid them out with alternating widths (wide, thin, wide, thin…) and mixing so that the matching backs were several ties away from the fronts. The nice thing is that the ends already have beautiful seams, so I left them as is and decided to sew the ties together side-by-side with just a very small amount of overlap (1/4 inch).

I pinned two ties together (both right side facing up with just a bit of overlap) and used a zigzag stitch on the ‘2’ setting on the sewing machine. Then I pinned the next tie and did the same, continuing until I had enough to wrap around Little Miss M’s waist. This is part of the hack – I don’t use patterns and I do a LOT of eyeballing. Both sides of the thinner tie sections were always on top of the ties beside them, and I started sewing from the pointed end going upward. Because the front side of the ties are wider at the pointed bottom, it gave the natural A-line needed for the skirt to flare out a bit at the bottom.
I could have used a contrasting thread like yellow to give the skirt a more eclectic personality, but I chose to stay with the red and blue color mood, so I used a red thread – which still gave a nice effect against the ties.
Now, if you remember my last sewing experiment with the sweater skirt made from recycled winter scarves, you’ll know that I will do almost anything to avoid sewing a waist. I just don’t know how to do it. So, to hack my way around it this time, I decided to take one of my old Tshirts that I had in the ‘do something with this’ pile, and I cut off the side seams straight up to the shoulders (cutting off arms as well). After another eyeball on Miss M to see how much the V-neck needed to be lifted, I sewed a new seam across the shoulders, sewed new side seams, and created a seam around the new arm holes. And because I don’t know the proper seams to use with Tshirt material, I always seem to get that slight ruffled effect (at least I tell myself it’s a ruffle effect). Does anyone know the right seam and stitch size to get a flat seam on Tshirt material? PLEASE tell me!
Next I just tucked that downsized white Tshirt down inside the tie skirt and sewed a zigzag seam right along the outside. I first thought that I was going to leave it with the seam exposed, but decided to give it a more ‘finished’ look by taking one more tie and wrapping it around the waistline. Then I simply zigzagged both sides of the tie all the way around. On the front side, I created a little ‘free-flow’ design with the ends of the tie and just sewed across the tie underneath each fold. I finished the little free-flow design by sewing on two buttons.
That free-flow design was inspired by the great recycled tie creations at Ties & Whimsy in Australia, so make sure to check those out if you plan to do anything for yourself.
And there you have it. This tutorial is about as hacked as the sewing job was, but I hope it gives you enough of a hint and enough inspiration to try your own.
One thing I would change if I were a better seamstress would be the upper part of the dress. The tie skirt is quite heavy compared to the Tshirt material up top and it pulls on it just a bit too much. This dress would be perfect with a white button down upper part – and if I knew how to downsize a man’s button down to a kid’s button down like this one below from Dana Made It, I think that would have made this recycled tie dress even better (I would only need the upper part of this re-do below).
But, all that aside, Divine Little Miss M was pleased with her new dress experiment – and she gave it a whirl to make sure that all parts were working.
Don’t miss the post earlier this week with over 30 inspiring ideas of what to do with recycled ties. There is something a bit luxurious about tie fabric and patterns, and there are some great projects out there to try.
Until next time…

Stumble this post

I’m also partying at these fun linky parties!

0 replies

Leave a Reply

Want to join the discussion?
Feel free to contribute!

Leave a Reply

Your email address will not be published. Required fields are marked *

16 − three =